Bjóðum upp á öruggar kortagreiðslur í gegnum Valitor ásamt Netgíró með möguleika á greiðsludreifingu
The cutting ability of a compound with the superior finishing ability of a polish with the unmatched work time of a glaze... all in one OEM approved Body Shop safe Paint Correction Polish.
Paint correction 1-2-3 will completely replace any compound and polish assortment offering amateurs and enthusiasts professional results with less effort and less time. Paint Correction 1 was designed to follow Paint Correction 2 and virtually any compound or polish to remove light to moderate swirls, marring and sand scratches restoring a like new perfect finish. Paint Correction 1 No. 788 replaces fishing compounds, polishes and glazes delivering a bright, smooth, flawless, perfect finish applied by hand or machine.
Paint Correction 1-PREMIUM POLISHING SYSTEM- Apply Paint Correct 1 No. 778 Finishing Polish using a White foam finishing pad. Using a rotary buffer, it is best to work at a speed between 1000-1500 RPM. Using a dual action polisher, work at a speed of 4 or 5. For optimal results work in a 2 x 2 sq. ft. area.
Paint Correction 1 No. 778- Super Finishing Polish is the most accurate final step polish capable of removing medium-heavy imperfections when used with a orange Foam Pad or Fine-Light imperfections when used with a White Foam Pad. Acu-Cut4 micron-sized polishing abrasives deliver a perfect finish with less passes, eliminating imperfections and even 1700 grit sanding scratches, swirls and holograms.
Paint Correction1 Acu-Cut4 micron-sized polishing abrasives deliver a perfect finish with less passes, eliminating imperfections and even 1700 grit sanding scratches, swirls and holograms.
|50/50- if perfection is what you're looking for, nothing will tell it like it is better than a 50/50 side by side of your before and after...the best part is it is shot at once. This beautifully detailed Red BMW M3 was submitted by master detailer Eric Turano. using Chemical Guys Hex Logic 6.5" White Pad and Only Paint Correction 1 the results are clear to see.|
Remove scratches, swirl marks, oxidation, spider-webbing, overspray and most surface imperfections in one easy step with paint Correction 1 (No. 778)
Benefits of Paint Correction Polishes- the most advanced compound line:
Acu-Cut4 micron-sized polishing abrasives deliver a perfect finish with less passes
Ideal for buffing dull and oxidizes headlights.
the fastest and easiest way to remove moderate scratches and surface imperfections.
works like a compound, a polish and a cleaner in one.
removes moderate to heavy scratches
eliminates surface imperfections.
extended work time without drying.
works especially well on clear coats
Paint Correction Polishes are engineered developed to achieve perfect results with a Rotary, Porter-Cable of Flex machine.
For best results use out of direct sunlight. Bright light and direct sunlight will reflect off of the surface glaring your vision and not allow for optimal view of scratches and swirls.
Using a clean terry towel or microfiber applicator pad or towel, apply a quarter size amount of product
Work in small areas, applying using a small circular motion.
Rub until dry. Buff away excess product. Repeat as necessary.
Start by making sure the surface to be compounded is clean and dry.
New or fresh paint should be fully cured.
Work Paint Correction 2 (No.721) out of direct sunlight. (it can be used in sunlight, but strong heat is not great for your head :))
Use a Orange Cutting pad like Chemical Guys Hex Logic 5.5, 6.5 or 7.5 inch pad.
Paint Correction Can also be used with a variety of other pads.
For Lighter polishing work and finishing work you can use the White Polishing Pad.
Apply product to pad in an "X" shape and if needed use a pad lubricant to assure maximum lubricity if needed.
With polisher in "off" position , spread the compound over about a 2 x 2 sq. ft. area.
Polish at 1200-1800 RPM (5000-6000 OPM with a dual action polisher (Porter Cable)).
Start by working slowly across surface, then up and down.
Always check the progress of your work to see if blemish or imperfection has been removed.
If imperfection or blemish is gone, reduce the pressure of machine and continue buffing to a high gloss and perfect finish is achieved.
It may be necessary to switch to Paint Correction 1 (No. 788)
If during buffing the pad becomes dry, spray a little Buffing pad Conditioner onto it and continue buffing.
Occasional wipe the area with a wet or lightly damp microfiber cloth. to better view the results.
If necessary, follow with Paint Correction 1 (No. 788) to restore and perfect and finish.
to protect your final results Chemical Guys recommends to always always apply a sealant after compounding.
Chemical Guys recommends Jetseal Aerospace Paint Sealant for the best level of shine and protection.
Allow polish to dry, then buff to a deep gloss.
Remember for optimal protection and durability, follow all polish with a wax or paint sealant.
Though CUT compounds will outshine most waxes it does not contain any waxes, sealants or protective qualities.
For optimal protection we suggest Jetseal.